The Printing Industry Is Contributing Positively To The Circular Economy

401
The Printing Industry Is Contributing Positively To The Circular Economy

According to Laurel Brunner from the Verdigris Project, it might be by accident but changes to how print media products are designed and produced are bringing the industry into closer alignment with Circular Economy principles.

The ideas behind the Circular Economy aren’t much talked about in the grassroots printing business, but some of the principles are starting to creep into conversations. Three main objectives underpin a circular economy: design products to eliminate waste and pollution; keep products and materials in use for as long as possible and support the regeneration of natural systems.

Print Service Providers (PSPs) printing on paper substrates obviously contribute to recycling and regeneration. Printers produce most of their prints on paper and efforts to improve plastic recycling continue to gain ground. Digital printers often specialise in high value short run work produced on demand and in the required quantities. This is obviously less wasteful than the disposable print created on spec in case someone might want it.

They also deliver high value print products that consumers want to keep. We treasure work such as photo albums and family posters especially if it is customised. Packaging printers are designing packaging to minimise materials and waste for brand owners who want greater environmental sustainability for their products. And across printing methods, printers are raising the quality of their output whilst simultaneously improving production efficiency to minimise waste.

Beyond digital printing, companies are using other techniques to enhance value, such as innovative screen technologies that help optimise output quality on different substrates like kraft or uncoated papers. This takes digital colour management a step further, because it exploits screening technologies within the colour managed workflow. It’s also an approach companies can take to get older presses to perform better. We have spoken to a number of printers using new screening methods who say that the technology has also made possible very fast start-up and improved chromatic stability on long runs, as well as easier cleaning. It all makes for more sustainable production.

Innovation of this sort allows print buyers to use different printing methods with greater confidence. We are seeing a clear migration away from gravure printing for instance. Sometimes it is to offset or flexo, but for short run work it is often to digital printing. Buyers can trust that there are PSPs around who will deliver, including digital printers. We are not yet seeing a clear preference for any particular digital printing technology, but inkjet is starting to gain ground in some packaging applications on the basis of improved quality and speed.

As brand owners start paying more attention to how print products are designed, PSPs are well placed to help. Technology that allows for control over run lengths, improved ink usage and recyclability all make a positive contribution to the sustainability conversation. And that’s a big positive for the Circular Economy of print.

This article was produced by the Verdigris Project, an industry initiative intended to raise awareness of print’s positive environmental impact. Verdigris is supported by: FESPA (www.fespa.com), Fujifilm (www.fujifilm.com/sustainability/), HP (www.hp.com), Kodak (www.Kodak.com/go/sustainability), Practical Publishing (www.practicalpublishing.co.za), Miraclon (https://miraclon.com), Unity Publishing (http://unity-publishing.co.uk) and Xeikon (www.xeikon.com).

THE VERDIGRIS PROJECT
http://verdigrisproject.com/

Previous articleMüller Martini Book Sewing Solution Expands Customer’s Capacity
Next articleROTOCON Customer Invests In Slitter Rewinder And LED Flexo Press